Follow us on LinkedIn for the latest industry news!

 

Category: Thermoforming

As humans, we like the familiar. The comfortable. And often, the answer to “why do you do it that way” is “because we’ve always done it that way.” That’s a fine answer when it comes to which section of the newspaper we read first (sports, followed by business and a cursory glance at the international news section, obviously) but more of an issue when it comes to choosing a manufacturing process.

If you’re currently manufacturing using sheet metal, it’s worth taking a look at switching to thermoformed plastic. It’s very possible that by making the switch you could end up with a better, more durable and more attractive product that costs less to manufacture.

Here are 11 reasons to consider the switch.
(more…)

Category: Thermoforming

Forty-two years ago, flying the friendly skies was a very different experience from what it is today. So you might be surprised to learn that there’s still demand for an aircraft part that was last manufactured in 1972.

This creates a challenge. How do you recreate a part that hasn’t come off a production line in over 40 years? The short answer is, you call Ray Products.

That’s more or less what happened when an aircraft parts manufacturer came to us with a sample part and a full-size drawing from the part’s last production run in 1972. They needed to create more parts, and they needed the replacements to match the original exactly.

We put our engineering team to work, and used a combination of cutting-edge 3D technology and 60+ years of industry experience to create a cost-effective replacement that matches the original part millimeter for millimeter.

Get the full story in our Project Gallery.

Category: Thermoforming

Raise your hand if you love germs. Ok – how about mold? Mildew? I have a pretty good hunch that unless you’re a mycologist you’re hand’s not up in the air.

Bacterial and mold contamination cause enormous amounts of harm. In the U.S., about 4.6 million cases of asthma are attributed to mold exposure according to the Global Indoor Health Network. And worldwide, millions are hospitalized every year for bacterial infections.

So – I think we can all agree that reducing bacterial and mold contamination is a good thing. Which is where antimicrobial plastics come in.

What Are Antimicrobial Plastics?

Antimicrobial plastics are, in short, plastics that inhibit the growth of bacteria, mold or mildew. They do this by disrupting the growth cycle of the microbes in a number of different ways.

There is a wide range of antimicrobial plastics available that use several different technologies for their antimicrobial properties. Some use proprietary formulations like Microban®, others use more traditional antimicrobial compounds like silver-ions. Each has its own unique characteristics, but the good news is that they’re available in a wide range of materials, colors, and thicknesses.

With thermoformed antimicrobial plastics, the antimicrobial protection isn’t just coated on the outside of the plastic, but integrated into the actual structure of the plastic itself. This means that the antimicrobial resistance lasts throughout the life of the product and works to reduce microbial contamination between cleanings.

What Can They Be Used For?

Antimicrobial plastics are worth considering for anything where bacteria, mold or mildew resistance could be a benefit to the product. If you’re making something that will come in contact with people or prolonged moisture, it’s worth considering using antimicrobial plastics.

Sample Applications:

  • Aircraft Interiors
  • Mass Transit Vehicle Interior Components
  • Equipment Housings
  • Foodservice Equipment
  • Medical Products
  • Healthcare Equipment
  • Durable Medical Goods
  • Sporting Equipment
  • Kiosk Housings
  • And More!

At Ray Products, we have access to a wide variety of antimicrobial plastics that can be incorporated into any of our pressure forming, vacuum forming, and large part thermoforming processes.

If you’re interested in custom manufacturing plastics with antimicrobial properties, we’d love to help.  Download our Lessons Learned whitepaper in medical device thermoformed manufacturing.

Category: Thermoforming

Ever wonder what goes on inside a thermoforming factory?  No?  Well, we’re going to show you anyway.

A while back, we were playing around with a GoPro and decided someone (even if it’s not you) might like to see the inner workings of Ray Products’ Theromoforming operations.  So, here you go.

Large Part Thermoforming

Thermoforming

Here – a piece of plastic enters our large part thermoforming machine (capable of handling 10′ x 18′ projects, though this one is much smaller), gets heated to a pliable temperature, and is then vacuum formed against the shape its mold.

(more…)

How Can Ray Products Help You Today?